Spiral cutter head
Chatter-free cuts
Unlimited rabbets
Optional bench unit
Optional rustic heads
Benefits of portable corded power Planers.
Depth controls are integrated into the handle, for easy adjustment on the fly.
Single blade planer head design for rapid blade changes.
Smooth cut performance reduces sanding time.
Single knife cutterhead produces less noise, reducing user fatigue.
Unlimited rabbeting feature does not leave a lip.
High dust extraction efficiency for less clean-up time and greater work efficiency.
Versatile – create smooth or rustic effects.
Safer – the side guard swings up as the rabbet depth increases.
Convert into a bench-mounted planer, with optional bench unit.
Planing Without Limits.
Conventional planers run up against obstacles during practical use because of design limitations such as limited rabbet depth and heavy tool weight. power planer has overcome these obstacles by introducing solutions that guarantee effortless operation, greater versatility and improved finished results.
Unlimited Rabbeting.
power planer is equipped with a single spiral blade cutterhead. Because the blade is drawn across the workpiece at an angle, it cuts cleaner, producing less noise and a smooth surface. And there’s no limit to the depth of rabbeting, or your ability to plane up to an edge, thanks to the planer head’s ability to cut flush to one side.
When you need precise material removal, choose power planer
Planing Applications.
This planer is capable of leaving a smooth surface while removing a full 9/64" of material from hard maple in a single pass. Use the optional bench unit with the planer for working with smaller pieces. By freeing up both hands, the workpiece is easier to control. A spiral blade makes chatter-free cuts that are ready to glue or finish without the need to sand, and blade changes are simple, given that there is only one self-aligning blade.
The special design of the cutterhead allows it to cut flush with the side of the tool, allowing you to make unlimited rabbet cuts on wood edges, and the built-in groove on the base plate simplifies chamfer cuts. Multiple cutting heads are available for creating different rustic effects, and as with most Festool tools, dust extraction ports are incorporated to make cleanup fast and easy.
list of specifications of the planer
| Standard Package Includes | ||
|---|---|---|
| Parallel Edge Guide | ||
| Standard Planer Head | ||
| Solid Carbide Standard Blade | ||
| Rabbet Depth Guide | ||
| Specifications | ||
| Power Consumption | 720 Watts / 6 Amps 120 volts AC | 850 watts / 7 amp 120 volts AC |
| Drive Shaft Speed | 15,600 RPM | 10,000 RPM |
| Cutting Depth | 0 - 5/32" (0 - 4 mm) | 0 - 9/64" (0 - 3.5 mm) |
| Rabbeting Depth | 0 - 29/32" (0 - 23 mm) | Unlimited |
| Head Width | 2-9/16" (65 mm) | 3-15/64" (82 mm) |
| Noise Level At Idle | 76 dB (A) | 79 dB (A) |
| Weight | 5.3 lbs. (2.4 Kg) | 8.6 lbs. (3.9 kg) |
how you use an electric wood planer
This machine, simply, planes the wood from saw finish to fine. It's mainly used in doors.
You can plane the edge of the door off. In wider pieces like this, you could do it, but you will get a series of lines which will need some sanding out afterwards.
You can set the blade by a knob on the front or sometimes at the top. They normally go from one millimeter up to 4.5.
The majority of the DIY ones go up to about 2.5 millimeters. It's very important not to take too much off in one hit.
You couldn't use this plane and then leave it unfinished. You'd have to sand it. But basically, simply to use the machine, it planes wood and wood only.
Do not attempt to plane metal with this, as it is extremely dangerous. So before we carry out some use of it, and a little bit more talk on it, just remember one thing, to always wear your safety goggles and your safety mask. As you can note, when I finished, I put it on its side.
Do not put it straight down on its face, especially on metal, because it will damage the blades. That will give me a pretty good finish now, and I can sand that, and that'll be perfect. As you can also see, there was a lot of debris that came out the bottom and the sides.
You can buy dust retraction kits for these and they're particularly useful, particularly when using them in the home. As a DIY novice, I wouldn't advise you to use one of these unless you've been shown how to use it by a professional. They're extremely dangerous, but extremely good when you can get the hang of them.
没有评论:
发表评论