12v air compressor car tyre inflator
Specification:
| Material | Metal(aluminum, alloy or stainless steel) |
| Rated Power | 90W |
| Voltage | DC 12V |
| Current | 15A |
| AirFlow | 25L/Min |
| Max Pressure | 300 PSI |
| Power Cable Length | 2.7m |
| Air tube Length | 50cm |
| Work Time | Lasting 1 hour available |
| Size | 40*40*30mm |
| Weight | 0.5kg |
| Apply To | Car tyre, bicycle, inflatable craft and balls etc. |
| Far From | Numerous water stains or corrosion liquid. |
step 1:Pull out the air hose, make sure the nozzle lever is in the up position.
step 2:Place the nozzle over the valve stem of the tyre or other item you need to inflate.
step 3:Lock the nozzle to the vale stem by pressing down on the lever.
step 4:Switch the compressor/spotlight switch to the COMPRESSOR position to turn the compressor on. Monitor the pressure gauge carefully.
step 5:When the desired pressure has been reached press the compressor/spotlight switch to the OFF position to turn the compressor off. Disconnect the air hose and replace it inside the unit.
NOTE:Sometimes, when the tyre is completely deflated, the seal between the tyre and the rim can be broken. This allows the air to leak when you are using the compressor. To fix this problem, you have to jack up your car prior to inflating the tyre.
To inflate other articles, select the appropriate nozzle adaptor and insert it into the nozzle at the end of the compressor hose making sure that the nozzle lever is in the up position. Press down on the nozzle lever to lock the adaptor into place.
For sports balls, the needle should be moistened before inserting it into the ball valve.
CAUTION:
Bursting items can cause injury so don't exceed recommended pressure levels.
DC12V mini car air compressor warning:
1.Please start the car to enhance electric power and prolong the lifetime of car battery.
2.This model is limited on DC 12V power. If you want to use AC power, you must use a adapter or
transformer.
3.Usually, the car tire could reach standard tire pressure 30PSI in 3 minute. If the needle of air pressure gauge
increase to 50-100PSI quickly, It’s a waring that air is blocked and didn’t get into the tire. Now, take away the
pump connetctor quickly and do it again.Otherwise, the motor and gauge will be easily damaged.
4.When using, You should notice the tire pressure and shouldn’t go away. And The tire is not recommended to
inflate too much.(Please refer to your car user indication on this point. )
5.If the car cigarette lighter is not clean and get rusted, that may lead to fuse burnout. And the pump won’t
running. So you must ensure the good condition of cigarette lighter and fuse. This pump is installed a fuse inside
the pump plug, please check the fuse inside the plug if the pump not running. The fuse is 15A.
6. To ensure the pump running good, it shouldn’t be used continuously more 10 min.
If you want it to running long time with no stop, please do 10 min running,10 min stopping for cooling. And then
continue. Otherwise, it will be damaged.
DC12V mini car air compressor application:
Car,motorcycle, bicycle, motorboat, SUV, balls, inflatable craft etc
DC12V mini car air compressor structure:
没有评论:
发表评论